ESENE WS330-PEGV4, Руководство пользователя

Страница: 25 / 59

www.escene.cn/en/
Escene Communication
--5) Set up the above parameters, select “Submit changes” to saves
settings, Complete the account creation.
* Note : the parameters with the * mark must be set.
Disable sip account --1) Select “System setting” > “Advanced setting”
；
--2) Enter the password required
（
The default is empty)
；
--3) Select “SIP” > “Account sip”
；
--4) Select “Enable account” > “Disable”
；
--5) Select “Submit changes” to saves settings
6.2 Network Setting
If you want to … Then…
network setting --1) Choose “System setting” > “Advanced setting”
；
--2) Enter the password required
（
The default is empty)
；
--3) Choose “Network”, you can configure the following parameters:
- Type : static IP or DHCP
- IP : enter IP address , Note: Do not duplicate the IP address with
other devices on the network
- Mask : enter appropriate subnet mask
- GW : enter appropriate gateway
- DNS1 : enter IP address of the primary DNS server
- DNS2 : enter IP address of the secondary DNS server
- Web port : the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
- Telnet port : the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.