ESDEC FLATFIX WAVE, Руководство пользователя, Страница: 15 / 20

ANNEX C - CABLE MANAGEMENT
14
2 TIP: ASSEMBLE A SMALL WIRE TRAY ON THE HIGH
BASE ELEMENTS OVER THE (START) UNITS
1 TIP: ASSEMBLE A LARGE WIRE TRAY ON THE SIDE OF
THE (START) UNITS
1. Fold out the lips of the high base elements.
2. Bring the top bar of the wire tray over these lips.
3. Fold the lips further around the rod to enclose it.
1. Fold out the lips on the side of the units.
2. Bring the top bar of the wire gutter over these lips.
3. Fold the lips further around the rod to enclose it.
Make sure that the wire tray does not rise above the units.
3 CONNECTORS AND CABLES TO BE FIXED IN THE
STABILIZER AND ON THE CABLE SUPPORTS
1. Connect the MC4 connectors.
2. Place the MC4 connector with the cables in the channel
section of the stabilizers and in the openings in the cable
supports.
3. Secure the MC4 connector and the cables with cable ties
through the perforations in the stabilizers.