PCB View with Connectors
•
No parts are placed under the PIM module.
•
Mounting holes are placed at the upper edge of the board.
See also page 16 for signal assignment of the connectors.
2.2 Component Placement of Reverse Version
•
The positions of the connectors JTAG, Test, Aux Power and Clock in the PCIe-
XPIMC(reverse)-Carrier are the same as in the normal version (see Figure: 2).
The signal assignment of these connectors is described from page 16.
•
The jumpers PROT and FAN are positioned between the connectors X4 and X3.
Figure 3:
Component placement specification of PCIe-XPIMC(reverse)-Carrier
•
The reverse version has the PMC/XMC and PIM sites swapped, so that the PMC/XMC
bezel is accessible via the slot bracket (see Figure: 3).
•
The position of the connectors J0, J1, J2, J4A, J4B, J15 and X300 and the pin position of
these connectors is described in Figure: 4 (page 9).
Page 8 of 27
Hardware Manual • Doc. No.: V.2100.21 / Rev. 1.2
PCIe-XPIMC-Carrier
