
Hardware Installation
2. Hardware Installation
Read the safety instructions at the beginning of this document carefully,
before you start with the hardware installation!
Danger!
Electric shock risk. Never carry out work while power supply voltage is switched on!
Attention !
Electrostatic discharges may cause damage to electronic components. To avoid
this, please discharge the static electricity from your body by touching the metal
case of the
CPCI system
before
you touch the CPCI-PS24.
The input of the unit is not internally fused. An external fuse of 8 A is
recommended.
The CPCI-PS24 needs a free slot of 4 HP width in the CPCI system. Beside the backplane, a 15-
pin female multipoint connector according to DIN 41 612 has to be mounted, to connect the CPCI-
PS24 via J2.
Do not plug the CPCI-PS24 into the CPCI backplane.
CPCI-PS24
Hardware Manual • Doc. No.: I.2301.21 / Rev. 1.0
Page 7 of 16