Version CAN-PC104/331-2-Micro-Match
The plug required, designed for use with standard flat-ribbon cables and crimp connection, has got
the following designation:
AMP Micro-Match, FRC, 10-pin, No. 8-215083-0
(available, e.g. from Farnell under order number 149-081)
The maximum length of the adapter cable including the externally connected cable to the T-
piece must not exceed 30 cm (ISO11898)!
5.2 Pin Assignment Micro-Match Socket
The following table shows the assignment of the Micro-Match socket on the board. Pin 6 of the
socket is not assigned.
Pin Assignment (View from Top Layer onto Connector):
Signal
Pin
Signal
reserved
1
6
not connected
7
CAN_GND
CAN_L
2
8
CAN_H
CAN_GND
3
9
reserved
reserved
4
10
reserved
shield
5
10-pin AMD-Micro-Match socket
CAN-PC104/331
Hardware Manual • Doc. No.: C.2012.21 / Rev. 1.6
Page 19 of 32
