Technical Data
CAN-M.2/402-2-FD
Hardware Manual Doc.-Nr.: C.2074.21/ 1.0
Page 17 of 32
6 Technical Data
Power supply voltage Nominal voltage:
3.3 V
(Nominal current:
I
3.3VMPMAX
= 320 mA,
I
3.3VTYPICAL
= 270 mA)
Power consumption
Maximum: 3 W (with 2 CAN interfaces at 100% bus load)
Connectors
M.2:
CAN:
B & M-Key connector
2x Wire-to-board IDC connector, 4-pin;
via adapter to: 1x 9-pin DSUB male per CAN channel
Temperature range
0°C ... 75°C ambient temperature
Humidity
Operation: max. 90%, non-condensing
Dimensions
22 mm x 80 mm x 4.4 mm
(PCB is prepared for shortening to 22 mm x 60 mm x 4.4 mm
by simply breaking off)
Weight
Board: approximately 8 g;
Adapter: approximately 8 g each
Table 3:
General Data of the module
FPGA
Intel EP4CGX22BF14C8N
Boot FLASH
Adesto AT25SF161-MHD-T
Table 4:
Microprocessor and Memory
PCIe port
PCI Express Spec. R1.0a, Link width 1x
Form factor
2280, can be reduced to 2260
The component heights on the PCB top side exceed the requirements of
the PCI Express M.2 specification.
The maximum component height is 2.24 mm instead of 1.5 mm.
Table 5:
PCIe Mini interface
INFORMATION
The optional CAN-M.2-80/402-2-FD comes with a maximum component hight of 1.5 mm,
as required in the M.2 specification. Form factor is 2280 only!
Contact our Sales Team (
) for further information.
6.1 General Technical Data
6.2 Memory
6.3 PCI Express Mini Interface