Case View with LED and Connector Description
2.1 LED-Displays
LED
NAME
Number
Status
Description
USB
LED300D
on
USB module is enumerated
(a node-ID is assigned to the USB module)
Power
LED300C
on
module is in operation,
the 5 V power supply is applied to the module
CAN
LED300B
on
data is received or send on the CAN bus
OK
LED300A
on
CAN interface is initialized, bit rates are set
off
bit rate not set
fast flashing
(appr. 10 Hz)
CAN interface is initialized and in mode ‘Listen Only’;
the bit rate is already set
slow flashing
(appr. 1 Hz)
CAN interface is initialized and in mode ‘Automatic
Baudrate Detection’ (from firmware version 1.0.0.4
and CAN driver version 2.5.2 on)
Table 1:
Description of LED display
CAN-USB/2
Hardware Manual • Doc. No.: C.2066.21 / Rev. 1.4
Page 9 of 25
