Hardware Installation
2.4 CAN-PCI/405-4 Version with 4 CAN Interfaces
In the CAN-PCI/405-4 version, the board is equipped with four CAN interfaces.
This module type is equipped with two additional SJA1000 CAN controllers. The physical layer of
the additional CAN nets is placed at a separate adapter board. The adapter board has to be
mounted close to the CAN-PCI/405 and has to be connected via the ribbon cable that is contained
in the scope of delivery.
The additional physical interfaces CAN2 and CAN3 are designed identical to the physical
interfaces of CAN0 and CAN1.
The four-CAN version CAN-PCI/405-4 has the order number: C.2023.07
It is not possible to connect the adapter board to a CAN-PCI/405-2 (order no.: C.2023.05).
Figure 4:
Connection of the adapter board
via ribbon cable
Figure 5:
CAN channel assignment to
the connectors
CAN-PCI/405
Hardware Manual • Doc. No.: C.2023.21 / Rev. 1.3
Page 11 of 28
