9
Settings and Preferences
SmartRadar offers seven user-selectable options so you can customize it to your preferences.
To access Preferences, press and hold both the BRT and SENS buttons on the mini display controller for
two seconds. SmartRadar will beep and display “Prefs,” indicating it is in program mode. (Display
brightness will automatically change to maximum during this process.)
Once the unit is in program mode, the BRT button is used to review the preference categories, and the
SENS button is used to change the individual settings within the selected option. You can either tap the
buttons to switch from item to item or hold to scroll through all the categories/options.
To exit Preferences, simply wait eight seconds without pressing a button. The unit will display
“Complete,” accompanied by a voice confirmation, and return to normal operation.
Example
Here’s how you would turn the AutoMute feature off:
1.
Enter Preferences by pressing and holding both the BRT and SENS buttons for two seconds.
SmartRadar will beep and display “Prefs.”
2.
Press and hold the BRT button. SmartRadar will scroll through the categories, starting with Pilot
Light (Pilot), then Power-On Sequence (PwrOn), Signal-Strength Meter (Meter), and AutoMute
(aMute).
3.
Release the BRT button when the display shows “aMute.” Since the factory setting is for
AutoMute to be on, SmartRadar will display “aMute ON.” (If you accidentally don’t release the
BRT button in time, and it goes to the next category, simply hold the BRT button down again
until “aMute” is displayed.)
4.
Press the SENS button to change from “aMute ON” to “aMute OFF.”
5.
To complete this change, simply wait eight seconds without pressing a button. The unit will
display “Complete,” accompanied by a voice confirmation. This is an indication that SmartRadar
has returned to its normal operation.
