11
PREFERENCES IN DETAIL
*
= Factory default
Pilot Light
(power-on indication)
*Pilot HWY
SmartRadar displays a full description of your radar sensitivity: “Highway,” “Auto” or “AutoNoX.”
Pilot H
SmartRadar displays “H” for Highway, “A” for Auto, and “ANX” for Auto No X.
Pilot H.>
SmartRadar displays “H” for Highway, “A” for Auto, and “ANX” for Auto No X. In addition, a single
dot continuously scrolls across the display.
Pilot V
SmartRadar displays the vehicle’s battery voltage.
Note: If the vehicle’s voltage drops below 10.5 volts, a low-voltage warning will be displayed,
followed by an audible alert. A high-voltage warning is also given when the vehicle’s voltage goes
above 16.5 volts.
Note: When operating in Dark mode, the display will be completely dark.
Power-On Sequence
*PwrOnFST
SmartRadar’s power-on sequence is shortened to a single beep. If any bands have been disabled, or
if any communication errors occur between the components, the appropriate messages will be
displayed at this time.
PwrOnSTD
Each time you turn on SmartRadar, it will display the product name, the bands being detected, and
the selected meter display. If any communication errors occur between the components, the
appropriate messages will be displayed at this time.
Signal-Strength Meter
*Meter STD
The standard meter displays the band, along with a bar graph indicating the signal strength.
Meter EXP
ExpertMeter simultaneously tracks up to two Ka-band, two K-band, and four X-band signals, with
accompanying bar graphs indicating the signal strengths.
Meter SPC
SpecDisplay shows the actual numeric frequency of the radar signal being received.
