3
IMPORTANT
The recommended installation and removal tool is a socket drive with the
appropriately-sized hex bit (refer to
Table 1
).
Do NOT
use an air impact tool when installing the locking pins
, as this may damage the pins,
resulting in installation and removal problems.
An air impact tool may be used with caution during the
removal
process only.
System Size
Hex Bit
S95
14mm
S110
17mm
S130 & S145
19mm
Table 1
Table of Contents
Adapter Installation – S95 only
Component Preparation
4
Install Pin
4
Install Adapter
4
Retighten Pin
5
Adapter Removal – S95 Only
5
Adapter Installation – S110, S130 and S145
Install Pin
6
Install Adapter
6
Retighten Pin
7
Adapter Removal with – S110, S130 and S145
Retract Pin
7
Nose Rebuild – All Sizes
Nose Fit
8
1. Nose End and Sides Rebuild
8
2. Nose Flats Rebuild
8
3. Rear Corner Rebuild
9
Lock Style Wear Cap Installation
10
For use on Weld-on Bases
10
Lock Style Wear Cap Removal
11
For Use on Weld-on Bases
11
Non-lock Style Wear Cap Installation
11
For Use on Intermediate Adapters
11
