G
F
CONNECTION:
The kit includes a universal car charger, connected to the cigarette lighter socket. The charger can
be connected to the cigarette lighter socket, both 12V and 24V.
First insert the car charger (F) into the cigarette lighter socket. The charger power LED will light
up. Then insert the miniature round plug into the power socket (G) on the right side of the recorder.
The device is ready for work. To turn on the recorder press button
for 3 seconds.
If the charger is not connected, the battery symbol on the display flashes.
If the charger is connected, the battery
symbol in the display does not flash.The first
charging of the battery recorder should last for a minimum of 3 hours. The battery symbol informs
about
the
state of charge of the recorder. The device should not be completely discharged and the battery
life may be reduced.
It is forbidden to connect chargers, phones and other mobile devices to the micro USB
socket on the left side of the DR203 recorder!
This socket is intended only for transferring data to a USB flash drive (pendrive)
BATTERY
When the device is not used for a long time,
remove the battery from the recorder and
disconnect the charger from the power
source. To remove the battery, turn the
recorder to the other side. Press the latch in
the middle of the case and remove the battery
from the device. Keep the battery and charger
in a clean and dry place.
Read the safety rules for battery and car charger in point 5.1
7
