Esco Cytoculture LS2-4A1, Руководство пользователя

Страница: 13 / 31

4
2.2 Menu Options
Please refer to the following diagram for complete reference to all menu options available.
MENU
SETTINGS
SET MODE
CALIBRATION
ADMIN
SET TIME
WARM UP
POSTPURGE
UV TIMER
VELOCITY UNIT
TEMP UNIT
SET CONSTANT
ZERO SENSOR
CALIB SENSOR
NORMAL
MAINTENANCE
NEW ADMIN PIN
NEW FAN PIN
A/F MONITOR
HH:MM
XX MINUTES
XX MINUTES
HH:MM
FPM | M/S
XXXX (Default 0009)
XXXX (Default 0000)
ENABLE | DISABLE
CELCIUS | FAHRENHEIT
RESET B/H/M
RESET UV/H/M
RESET DEFAULT
2.2.1 Settings
The user may use the settings menu function to customize the operation of the Cabinet to meet specific
application requirements.
2.2.1.1 Set Clock (Time)
Users can set the time by increasing/decreasing the hour and minute values. The correct time will be
maintained even after the unit is turned off.
MENU SETTINGS SET TIME HH:MM
2.2.1.2 Warm Up Timer
There will be a period of warm-up, before the fan is fully functioning. This is to ensure that the sensors, the
fan, and the control system are stabilized, as well as purging the work zone of contaminants. The default
setting is 3 minutes and user can set it up to 15 minutes.
MENU SETTINGS WARM UP XX MINUTES