CO
2
/O
2
Gas and temperature Validation unit MIRI GA
®
Use Manual Rev. 2.0
27
In the top is a static navigation bar that is shown the same in every view.
It shows the name of the program.
The serial number of any attached device.
4 main navigation buttons: Main; History; Alarms; Report
4 utility buttons: Reconnect; Settings; Minimize; exit.
Overview of the 6 channels with both temperature, alarm limits (if set), gas concentration and
flow data. The channel that is the current gas sample channel is blue for the gas data. The
channels where only temperature data are received are shaded in the gas data field to show they
are not active. Either switch manually between sample ports or set the automatic sample switch
mode (see section 11.3.2.).
Parameters are set on the MIRI GA
®
. The data logger software only shows the
results, and lets the user document or work with the data.
If the limits are set the main view will also show alarms on any active channel that is outside
the limits.
Figure 17.2
Alarms on any active channel
Alarm on temperature channel 2-6. Channel 1 is not connected.
