- 6 -
English
Safety instructions
X
Risk of dazzling and injury! Do not look at the light source for long periods!
X
Protect your desk lamp from impact or shock, moisture and excessive heat!
Never place your desk lamp near a heat source or in direct sunlight.
X
Do not use the desk lamp near containers filled with water!
X
Risk of tripping! Make sure that the power cord is not posing a danger!
Do not wrap the power cord around the table lamp!
X
Ensure that other people, particularly children, are aware of these risks!
Operating elements
q
Stand
w
Lamp head
e
Arm for adjusting the lamp head
r
Support arm for the lamp head
t
Joint to adjust the support arm for the lamp head
y
Socket for the power cord plug
u
Color temperature toggle switch M
i
button: switching on and off
o
button: increase brightness
a
button: decrease brightness
Starting up
1. Set the desk lamp on a flat and stable surface.
2. Plug the connector of the supplied power cord into the socket
y
at the rear of the lamp
base.
3. Insert the mains plug of the cable into a properly wired electrical outlet.
4. Gently tap the touch button
i
to turn the lamp on or off. A slight warming in the area
of lit LEDs is normal.
5. Use the touch buttons
o
and
a
to adjust the brightness. Repeatedly tap briefly
o
to increase the brightness in 5 steps. Repeatedly tap briefly
a
to decrease
the brightness in 5 steps.
6. Tap on the toggle switch M
u
repeatedly to switch through the 3 available color
temperatures:
2800 K, provides a yellowish warm-white light.
3850 K, provides a yellowish-white light.
4900 K, provides a slightly blue-white light.
7. Adjust the lamp head
w
and its support arm
e
to suit your requirements.
8. To disconnect the unit from the mains power supply, unplug the power cord from the
wall outlet.
BDA_economy vision LED_multi.indd 6
25.07.2016 18:12:36
