Escali BFBW200, Руководство по эксплуатации продукта

Страница: 3 / 24

3
MEASURING BODY WEIGHT & BODY COMPOSITION
1.
Press and hold your foot on the center of the scale’s platform. The scale will begin
cycling through all profile numbers “01” to “10”. Lift your foot off the platform of the
scale when your profile number is on display to select your profile.
2. After the scale quickly shows your user profile data it will display zero weight. You
may now step on the scale and stand still in the center of the platform with clean
and dry bare feet, touching each of the metal foot placers. After a few seconds the
scale will display your body weight.
3. Next, the scale will display a progress bar while it calculates your body composi-
tion. Keep still on the scale with your bare feet contacting the metal foot placers.
4. Finally, the scale will display your current body composition measurements. You
may now step off the scale. The scale will cycle through your body weight, body fat
and body water measurements four times before turning itself off.
MEASURE BODY WEIGHT WITHOUT A PROFILE (WEIGHT ONLY MODE)
Tap the platform of the scale and remove your foot immediately. After the scale displays
“8888” it will show zero weight. You may now step on the scale to measure body weight
only. You do not need a user profile saved in the scale. You do not need to be bare foot
and your feet do not need to contact the foot placers.
HOW DOES THE SCALE MEASURE BODY COMPOSITION?
This scale uses Bioelectrical Impedance Analysis (BIA) technology to measure body
composition. BIA technology sends an unperceivable electronic signal through your
body to calculate your body fat, body water and muscle mass percentages. Do not use
this scale if you have a pacemaker or other internal electronic medical device.
HOW DO I GET THE MOST ACCURATE RESULTS?
Hydration levels fluctuate throughout the day and are affected by eating, drinking and
exercise. As a result, for maximum accuracy and repeatability, it is recommended that
this scale is used at the same time of day under the same conditions to establish a per-
sonal average. These readings are a close indication, and not an exact value. Please
consult your doctor for more information.
REVIEWING USER PROFILE DATA
To view the personal data of your user profile, press the button with the scale
turned off and use the or arrow buttons to select a user profile. Follow steps 3
through 7 of the “INITIAL SETUP: CREATING & EDITING USER PROFILES” section
located on page two to review, edit and confirm personal profile data.