8
Waco Instruction Manual
16. Locate the interplane or ‘N’ struts.
Note: Take care as the ‘N’ struts will only fi t in one
direction. The bottom of the strut will match
the contour of the wing surface.
17. Install the ‘N’ struts as shown using the small
5.5mm x 2mm screws provided.
18. Locate the upper wing.
19. Position the upper wing and secure using the
small 5.5 x 2mm screws for the ‘N’ struts and
the 9 x 2mm screws for the cabane struts
.
20. Fit the aileron connecting rod. Insert the ‘Z’
bend end through the control horn on the top
wing. Use the adjustable clevis on the other
end of the pushrod to ensure the top aileron
is level.
21. Locate the propellor and spinner
20. Fit the spinner back plate onto the propeller
shaft making sure the nut on the shaft fi ts
snuggly into the hex on the back plate.
21. Fit the propeller and secure with the retaining
nut provided. Gently tighten with spanner or
shifter (not provided).
Cabane Struts
‘N’ Struts
