6
Waco Instruction Manual
ASSEMBLING THE WACO
1.
Locate fuselage and the landing gear
assembly.
2.
Firmly push the landing gear assembly wire
into the slot until it “clicks” and locks in
position..
3.
Locate the tail plane assembly and the mount
for the vertical fi n.
4.
Insert the tab on the underside of the mount
into the slot in the top of the tail plane
assembly.
5.
Secure the tail plane with two of the 9mm x
2mm screws provided.
6.
Locate the vertical fi n and rudder.
7.
Slip the tail wheel steering arm into the pre-
installed bracket on the base of the rudder.
8.
Slide the verticle fi n into the mounting
bracket on the tail plane.
9.
Secure the verticle fi n with two of the 9mm x
2mm screws provided.
