background image

5

OPENING AND CLOSING INSTRUCTIONS

CAUTION:

EXERCISE CAUTION IN OPENING/CLOSING TABLE. SMALL CHILDREN, OR
CHILDREN NOT PROPERLY INSTRUCTED IN ITS USE, MUST NOT BE ALLOWED TO
OPEN/CLOSE TABLE. IMPROPER HANDLING AND MISUSE CAN RESULT IN SERIOUS
INJURY OR DAMAGE. DO NOT CLIMB, STAND, OR JUMP ON TABLE. MOISTURE
AND CONDENSATION WILL DAMAGE PLAYING SURFACE OF THIS TABLE. STORE
IN DRY, INDOOR PLACE.

TO OPEN:
1. Open legs on one table half and lock both leg hinges.

2.

Standing at center of table, hold center of top edge with one
hand and U-Support with other hand. Pull U-Support outward
toward you to midway position. Continue to pull top of table
until leg rests on the floor. Do not leave table partially opened
at midway position. See Figure 4.

Figure 4

Figure 5

3.

Open legs of second table half and lock both hinges as with the
first half.

4. Lower second top as described in step 2.

5.

Lock all four center hinges. See Figure 5.

TO CLOSE:
1.

Remove net and net posts from
table.

2.

Unlock all four center hinges. See
Figure 5.

3.

Lift one table half to midpoint until
the leg clips are engaged. Then
continue lifting until closed.

4.

Unlock leg hinges on this half and
fold legs against top.

5.

Raise other table half in the same
manner.

Figure 7

Figure 6

6.

Secure net posts to center of table and slide net down
over posts. See Figure 6.

NOTE: Net will be tight. It will be necessary to stretch

net. This will insure proper net tension.

Safety

Clip

Push to

lock hinge

Leg hinges
locked

Pull to
lock hinge

PLAYING POSITION

STORAGE

POSITION

U-Support

Tube

Midway

Position

Center and leg

hinges locked

Pull leg open and

lock leg hinges

PLAYBACK POSITION

Содержание Stiga T8127








Отзывы: