DETAIL A
5
3
Anchor
NOTE:
Holes must be in the
Vertical
position as shown
before screwing to wall anchor.
Flat Surface
FIGURE 3
3
4
NOTE:
Tighten
until secure, but
DO NOT
OVER-
TIGHTEN.
4
Phillips
TOOL NEEDED
If installing to the back of a
basketball pole
go back to
Step
2 on page
3
. If mounting to a
Wall
continue on this page.
3. Attach Mounting Bracket (
#3
) to the wall using Screw (
#5
) as shown
in
Detail A
. The
flat surface
of the bracket must be facing the wall.
NOTE:
Holes in the Mounting Bracket (
#3
) must be in the
Vertical
position as shown in
Detail A
before attaching Mounting Bracket to
the wall.
If you are mounting the Ball holder to a wall you will need to
purchase either a drywall
or
masonry wall mounting kit
depending on the wall you have. The kit will need an anchor
for a #10 phillips head screw.
NOTE:
2. Follow the manufacturer’s instructions on installing the anchor
and then proceed to
step 3
.
#8 X .375 Phillips Head
Trilobular Screw
1B-7225-00
QTY. 2
4
HARDWARE NEEDED
#10 X 1.0 Phillips screw
1B-7226-00
QTY. 1
5
4. Attach the Ball holder assembly to the Mounting Bracket with two
Screws (
#4
). See
Figure 3
.
