1.
Slip one end the net sleeve
halfway
down the Net support tube.
1.
For easier disassembly & re-assembly keep net support tubes in net sleeves and fiberglass rod in middle sleeve, then roll net and store in the
carry bag. Take-down of Frame assembly is reverse of Set-up.
TAKE-DOWN:
6
9
at 36” at the sideline. Use the velcro straps to keep net from sagging as shown in
Detail C
. Repeat for other end of the net.
12
Plastic Cap
Detail C
Detail D
WINDY CONDITIONS:
For windy conditions we recommend using canopy weights (not included) on both end bases to keep the nets in place. See
Detail D
.
Weighs can be purchased at:
www.canopyweights.com
Canopy weights
(not included)
-3-
P I C K L E B A L L N E T
S E T- U P.
2
1
b.
Insert the Fiberglass Rod
(#9)
into the middle sleeve of the net, then place the fiberglass rod into the small tube on the Middle base.
c.
Secure middle Net Sleeve to
(#6)
Middle Base Support Tube with the Velcro straps on the Sleeve.
d.
Position the Net Sleeve and Velcro strap about 1/2” from the bottom of the plastic cap of the Net Support Tube, this will keep the net
a.
On the other end, insert a Net Support Tube (
#2
) into the net sleeve, then slide tube
(
#2
)
into the end base
(
#1
)
. Slide the first sleeve
all the way
down at this time.
10
