1
2
3
4
5
7
6
1
3
Before assembly make sure you have enough room to put the net together. The net assembly is 22 feet (6.7m) wide, a
standard pickleball court is 20 feet (6.1m) wide and 44 feet (13.41) long. See Page 6 for an Illustration of the Court.
5
7
5
Detail B
5
5
5
8
6
7
Detail A
Spring Lock
Start with this End Base
1.
Take all components out of the case and sort them, all items are labeled.
a.
Set End Base
(#1)
on a hard flat surface, insert Net Support Tube
(#2)
and Angled Tube Support
(#3).
b.
Insert the Short Support Tube
(#4)
to tube
(#3)
followed by two Long Support Tubes
(#5).
c.
Insert “T” Support Tube
(#7)
to Middle Base
(#6)
until the spring lock engages in to the hole on the Middle Base. See
Detail A
.
d.
Slide Middle Base Tube assembly over Support Tube
(#5)
from
Step b
. Then insert another
(#5)
Support Tube as shown in
Detail B
.
e.
Complete the frame assembly by connecting another
(#5)
, tubes
(#8)
,
(#3)
and End Base
(#1)
as shown
.
-2-
P I C K L E B A L L F R A M E
S E T- U P.
