5
Detail 4
*Board Arms not
shown for clarity.
NOTE:
Remove
old
hardware.
6. Using a stable ladder, lift the upper parts of the nets one at a
time and slide the Safety Stop
Bolt
(
#14
) through Washer
(
#15
), grommet on net tab,
Spacer
(
#17
) and through the
pole. Then slide the bolt through another
Spacer
(
#17
) other
grommet on net tab, Washer (
#15
) and
Nut
(
#18
) as shown
in
Detail 5
. After the nets are attached, make sure to tighten
Nut
(
#18
) onto
Bolt
(
#14
) but
be careful not to crush the
grommet
on net tab.
Yard Guard
*Rim
not sho
wn
for clar
ity.
8
(Right)
7
(Left)
4L-8156-00
WAR
NING
!
NOTE
: Make sure
Warning Label and
artwork face
FRONT.
4. Raise the backboard, by turning the Actuator Crank, until the
lower arms are no longer making contact with the Safety Stops.
Figure 3
NOTE
: Use hardware from Yard Guard kit to replace the
existing hardware. The #14 bolt in the kit will be longer
that the one on your basketball system.
5. Using a stable ladder carefully remove safety stop bolt
assembly that’s assembled on your pole. See
Detail 4
.
Detail 5
*Board Arms not
shown for clarity.
8
7
Grommet
Pole
Grommet
15
15
14
17
17
18
Pole
!
