
© 2012 Escalade Sports
For Customer Service Call 1-888-996-2729
11
All Rights Reserved.
FIGURE 10
PARTS REQUIRED:
4 pcs -
H5
Phillips Flat Head Screw
2 pcs -
P4
Chrome Goal
8 pcs -
P16
Rod Handle
6 pcs -
H6
Phillips Flat Head Screw
2 pcs -
P10
Scorer
2 pcs -
P17
Ball Entry Cup
8 pcs -
H14
Phillips Round Head Screw
8 pcs -
P15
Rod End Cap
STEP 10:
Attach
P4
Chrome Goal onto
P2
End Apron using
H14
Screws as shown in
FIGURE 10
.
Tighten, but do not
strip out H14 Screws. IMPORTANT NOTE: Make sure each P4 Chrome Goal is "seated" all the way
back into end apron before installing H14 screws - Otherwise - the soccer men may hit the edges of
chrome goal.
Attach
P10
Scorers onto the top of
P2
End Apron using
H5
Screws as shown in
FIGURE 10
.
Tighten, but do not strip out H5 Screws.
Attach
P15
Rod End Caps to the rod as shown in
FIGURE 10
.
Slide
P16
Rod Handle onto each rod end with the small hole as shown in
FIGURE 10
.
IMPORTANT NOTE: A small amount of liquid soap applied inside each P16 Rod Handle will allow them
to slip onto rod easier.
Attach
P17
Ball Entry Cups onto
P1
Side Aprons
using
H6
Screws as shown in
FIGURE 10
and
DETAIL B
.
Tighten, but do not strip out H6
Screws.
THIS STEP REQUIRES FOUR OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
Hole /
Handle End
P16
P15
H5
P10
H5
DETAIL B
H6
P17
P1
P2
P4
H14
NOTE:
Use a short
phillips screwdriver
to install these
H14
Screws.
Содержание Atomic G01354W
Страница 26: ......