© 2017 Escalade Sports
For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
STEP 2
Then slide the
P5
Playfield with the graphic facing down into the grooves of
P1R
and
P2R
Side
Aprons as shown in
FIGURE 2
.
STEP 3
Attach
P3R
End Apron-A onto
P1R
Side Apron-A and
P2R
Side Apron-B using
H4
Bolts and
H6
Washers as shown in
FIGURE 3
.
Use T1 Allen Wrench to tighten all H4 Bolts in STEP 1 and STEP 3 now.
Center and attach
P5
Playfield in the cabinet using pre-driled holes with
H1
Screws as shown
in
FIGURE 3
.
Tighten, but do not strip out H1 Screws.
P5
PLAYFIELD MUST BE CENTERED
BEFORE INSTALLING H1 SCREWS
PARTS REQUIRED:
1 pc -
P5
Playfield
1 pc -
P3R
End Apron- A
4 pcs -
H4
6 mm x 50 mm Allen Head Bolt
4 pcs -
H6
6.5 mm x 16 mm Flat Washer
8 pcs -
H1
3.5 mm x 35 mm Phillips Round Head Screw
FIGURE 2
FIGURE 3
H1
P1R
P5
P2R
P4R
P1R
P2R
H4
H6
P3R
NOTE:
Playfield Graphic on
the underside facing the floor
NOTE: C3, C6-A, C6-B and C7 wires
all stay ABOVE playfield.
Black and Red wires in
this correct position for
future leg assembly.
H1
IMPORTANT NOTE:
Please be sure to install H1 Screws
exactly as per FIGURE 3.
Screws must be screwed straight down.
Leave the red and black wires
in the cut out of P3R End Apron
Leave C3, C6-A, C6-B, C7
C8 and C9 wires inside of
aprons and above playfield
C9
C8
4
4
3
3
3
3
4
4
NOTE :Use the 1-1,2-2,
3-3,4-4 – numbers on
the bottom corner of
each apron to correctly
orientate the 4 aprons.
C6-B
C6-A
C6-B
C6-A
C3
C3
C7
C7
Outside
Outside
Outside