QS
G V1
.0
Ready to use your EWC46 Wine Chiller?
It isn’t good to keep things bottled up.
Installation
Before installing your new Wine Chiller please
read all safety instructions in the user manual.
Place the Wine Chiller on a sturdy, level floor
for quiet operation. If it is to be placed on carpet,
support it with a wooden board underneath.
This appliance is designed to be freestanding only
and should not be recessed or built in.
@esatto.house
@esatto.house
Product Details
Dimensions (W, D, H mm) /
545 × 565 × 855
Capacity/
45 Bottles
Warranty /
2 Years
Get in Touch
Need help? Contact our friendly support team
via the contact details below.
Phone /
1300 11 4357
Email /
How was your esatto experience?
Share your story at
esatto.house/review
We’re on Socials!
Recommended Temperatures
• Bordeaux Red:
18° C
• Burgundy / Bordeaux Red:
16° C
• Port:
15° C
• Young Burgundy Red:
14° C
• Young Red Wines / Rosé:
12° C
• Aged White Wines / Chardonnay:
10° C
• Sherry:
7–9° C
• Young White Wines:
5–7° C
Operating Instructions
You can set and adjust the temperature in the
Wine Chiller to anywhere within the cooling range
(5° C – 18° C) using the + and – buttons on the
Control Panel to set the desired setting.
• Light:
The light button will switch the interior light
On and OFF.
• Switching between °C & °F:
Press and hold both LIGHT and POWER buttons
simultaneously to switch between displaying
the temperature in Celsius or Fahrenheit
For more tips on operating your Wine Chiller,
please see page 10 of your User Manual.
Before First Use
• The wine cabinet must be rested for at least
four hours before connecting power.
• Powering on: Press and hold the POWER button
for three seconds to turn the appliance on.
• Cooling down: When you first switch on
the wine chiller, the compressor will run
continuously until the wine chiller reaches the
set temperature. During this period of time, try
not to open the door frequently or place bottles
inside the appliance. After about 3–4 hours,
you can start loading the wine chiller.
• Note: You may notice an odour when you first
switch on the wine chiller. This is due to the
parts being new and is no cause for concern.
The odour will subside as the wine chiller
starts to cool.
