User Manual
10
UNPACKING
• Packaging materials:
This appliance has been packaged to protect it against transportation damage.
Remove all packaging materials from around and inside the appliance including the bottom cushions,
foam pads, tapes inside the cooler, tear off the protective film on the door and the cooler body. Keep the
original packaging carton and materials in a safe place. It will help prevent any damage if the product
needs to be transported in the future, and you can use it to store the appliance when it is not in use. In the
event the carton is to be disposed of, please recycle all packaging materials where possible.
• Check:
to see if all items are present.
• Inspect:
the equipment and accessories for transport damage. In case of complaints, the supplier is to be
informed immediately.
•
Suffocation:
Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all
packaging materials are out of their reach and disposed of safely.
• Power cord:
Unwind the power cord to its full length and inspect it for damage. Do not use the appliance
if it or its cord have been damaged or are not working properly. In case of damage, contact our after sales
support line for advice on examination, repair or return of the damaged product.
• Read the manual:
Read this manual to familiarise yourself with the appliance. Pay particular attention to
the safety instructions on the previous pages.
• Clean:
To remove any dust from transit and storage, clean the interior and exterior surfaces of the
appliance with lukewarm water and a soft cloth. Dry thoroughly.
Important:
do not use harsh or abrasive
detergents or powders as these will damage the finish.
FIRST USE
Before turning on your wine cooler for the first time:
• The cooler must be rested for at least half an hour before connecting power.
• Clean up the inner chamber .
• Do not connect cooler to electronic energy saving plug and converter that can convert DC into AC
(E.g.: solar energy system. ship grid).
• Water drop or frost will be generated on back side of wine cooler when compressor is running.
This is a normal function of cooler, wiping out frost or water drop is not required as they will evaporate
automatically. The defrosted water will be collected into drain tank and then inflow into water disposal
pan above the compressor and vaporized.
Getting Started