esatto.house
21
Appendix
P.26
P.27
Door lock
problem
Door is not closed properly.
Restart after the door is closed.
Reason
Solution
Description
Display
LED
Please call up service line if there are still troubles.
Drain problem
while washing
Water injecting
problem while
washing
Tap is not opened or water
flows too slowly.
Inlet valve filter is blocked.
Inlet pipe is twisted.
If water is not supplied
Open the tap or wait till the
water supply becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in the
room.
Please call up service line if there are still troubles.
Please call up service line if there are still troubles.
Outlet hose is blocked or twisted
Drain pump is blocked
Wash and straighten outlet hose.
Wash drain pump filter
Please call up the service line if there is any other problem.
Remove the problems
The label and sign on the fabric can help you to choose the best way to launder your clothes.
Iron
Do not iron
Dry clean
Do not dry clean
Warm iron.medium
(max 150
℃
)
Cool iron(max 110
℃
)
A
F
Dry clean normal cycle
with any solvent
Dry clean normal cycle
petroleum solvent only
Dry flat
Tumble dry normal
Drip dry
Hang to dry
/Line dry
Tumble dry. Low heat
(max 110
℃
)
Tumble dry. Medium
(max 150
℃
)
C
C
Bleach
Do not bleach
Hand wash
Do not wash
40
Warm wash
(max 40
℃
)
Chlorine bleach
may be used
Normal wash
Gentle wash
Chlorine bleach
not be used
Do not tumble dry
Iron with cloth
Steam Iron
Dry after wash
Line Dry in shade
Warmly dry clean
No Wring
Line Dry
No machine wash
To avoid fire,electrical shock and other accidents,please remember the following reminding:
- Only the voltage indicated in power label can be used. If you are not clear of the voltage
at home, please contact the local power bureau.
- When you are using the heating function, the maximum current through the washing
machine will reach 10A. Therefore, please make sure the power supply units (current,
voltage and cable) can meet the normal load requirements for the machine.
- Protect the power cord properly. Power cord shall be fixed well so that it will not trip the
people or other things and be damaged. Special attention shall be paid to the socket. It
shall be plugged into the sockets easily and attention shall be paid to the plug location.
- Do not make the wall-mounted socket overloaded or cable extended. Overloading of the
wiring may cause fire or electrical shock. Do not pull out power plug with wet hand.
- To ensure your safety, power plug shall be inserted into an earthed three-pole socket.
Carefully check and ensure that your socket is properly and reliably earthed.
Appendix
