Esaote MyLabX6, Начало работы

Страница: 43 / 124

S Y S T E M O V E R V I E W
MyLab
- G E T T I N G S T A R T E D 3 - 7
GETTI
NG STARTED
Control Panel Assembly
The control panel assembly includes the system handle, all system controls,
the touchscreen, the loud speakers, the probes, gel and ECG cables holders.
The LCD is installed on top of the assembly.
The
O N /O FF
switch is located beside the touchscreen, on the left side.
USB Port Two (2) USB ports are located on the left side of the control panel. These
ports can be used to connect a USB device for digital storage, a USB
footswitch or a USB printer.
Pull out Qwerty
Keyboard
A pull out alphanumeric keyboard is placed at the base of the control panel.
The keyboard is mounted on a sliding drawer: just push it to extract the
keyboard.
The control panel assembly can be rotated for optimal working orientation
and for transportation.
Fig. 3-2: Pull out Qwerty keyboard
Probe, Gel and
Cable Holders
Insert the holders on the lateral stirrups and place them in the desired
position.
Console
Probe Connectors Four probe connectors (EA1÷EA4) are located on the front of the system.
Auxiliary USB Port
and Burner
On the left side and on the rear side of the console there are four (4) auxiliary
USB ports and a CD/DVD burner (left side). The USB ports can be used to
connect a USB printer, a USB footswitch or a USB digital archive medium.
The burner allows the operator both to burn and to read CDs/DVDs.