manualshive.com logo in svg

Esaote MyLab SigmaVET, Начало работы, Страница: 56 / 134

Поделиться
Скачать
Esaote MyLab SigmaVET Скачать руководство пользователя страница 56

S Y S T E M   O V E R V I E W

MyLab

  -   G E T T I N G   S T A R T E D

3 - 12

Accesorized mobile configuration

The trolley can be equipped with many accessories:

x

Insulation transformer,

x

Probe multi-connector,

x

Auxiliary monitor.

Insulation 

transformer

The insulation transformer is mounted under the base of the trolley. The
insulation transformer is always necessary when other optional accessories are
mounted on the trolley. 

When the insulation transformer is mounted on the trolley, peripherals can
be placed on the dedicated tray and can be powered by it.

NOTE

When selecting the peripheral, consider its dimension so that it can be

safely installed on the console. The tray measures 33x17 cm.

CAUTION

The peripheral weight may not exceed 3 kg. The dedicated tray could be
damaged if the peripheral weight exceeds this limit.

CAUTION

The weight in the compartment for additional accessories may not exceed
3 kg. The compartment could be damaged if the weight exceeds this limit.

CAUTION

The max. weight of the trolley is 75 kg (including all options).

Probe Multi-

connector

The trolley also offers the possibility to mount a probe multi-connector to
increase up to four the number of probes that can be simultaneously
connected to 

MyLab

.

The multi-connector has to be connected to any of the two 

MyLab

 probe

connectors. Refer to Probe Connections paragraph for further information.

NOTE

The Transesophageal probes are not managed by the multi-connector.

Auxiliary Monitor

The auxiliary monitor is mounted on the trolley; it must be powered through
the insulation transformer and connected to 

MyLab

 HDMI video port. The

auxiliary monitor has not to be used for diagnostic purposes.

Содержание MyLab SigmaVET







































































































































Отзывы:

Нет отзывов