Copyright 2004 by Election Systems & Software, Inc. Model 100 Pre-Election Day Checklist
All rights reserved.
12
94.
95.
96.
97.
98.
99.
100.
101.
102.
103.
104.
Press
YES
again to confirm your desire to clear the totals. The message,
”ELECTION CARD INSERTED OPEN POLLS NOW”
will appear.
Press
YES.
When prompted, turn the key switch to
VOTE
to open the polls. The
scanner will automatically print the reports that were programmed into
the election definition. The scanner will display the message,
INSERT
BALLOT.”
Run a test deck of ballots through the scanner. ES&S recommends you
test each scanner with a test deck of ballots that will be used at the
precinct where you will place that scanner.
After scanning all the ballots, turn the key to the
OPEN/CLOSE POLL
position.
Press
CLOSE POLLS.
The scanner will automatically print the reports
that were programmed into the election definition.
Check that the reports reflect the appropriate test deck results. If they
match, continue with Step 101. If the results still do not match after the
second test, call ES&S Customer Service at 1-800-247-VOTE (8683) for
assistance. If the results match, continue with the next step.
After the reports have stopped printing, turn the scanner key to the OFF
position and remove the PCMCIA card.
In the method required by your network configuration, transfer the
election results from the PCMCIA card into Election Reporting
Manager. Print the election reports and confirm that the results match
the results from scanner’s internal printer. If they match, skip to Step
118. If the results do not match, continue with Step 103 to perform the
test again.
Insert the PCMCIA election card into the scanner.
Turn the scanner key to
OPEN/CLOSE POLL.
After the scanner has
initialized, the
POLLS CLOSED
menu will appear.
