ESAB RobustFeed AVS, Инструкция по эксплуатации

Страница: 7 / 42

1 SAFETY
0446 680 001 - 7 - © ESAB AB 2021
MOVING PARTS
Moving parts, such as fans, rotors and belts can cause injury.
Therefore:
1 Keep all doors, panels, guards, and covers closed and securely in place.
2 Stop the engine or drive systems before installing or connecting a unit.
3 Have only qualified people remove covers for maintenance and troubleshooting as
necessary
4 To prevent accidental starting of equipment during service, disconnect negative (-)
battery cable from battery.
5 Keep hands, hair, loose clothing and tools away from moving parts.
6 Reinstall panels or covers and close doors when service is finished and before
starting engine.
WARNING!
FALLING EQUIPMENT CAN INJURE
• Only use lifting eye to lift unit. Do NOT use running gear, gas cylinders or any
other accessories.
• Use equipment of adequate capacity to lift and support unit.
• If using lift forks to move unit, be sure forks are long enough to extend beyond
opposite side of unit.
• Keep cables and cords away from moving vehicles when working from an aerial
location.
WARNING!
EQUIPMENT MAINTENANCE
Faulty or improperly maintained equipment can cause injury or death. Therefore:
1 Always have qualified personnel perform the installation, troubleshooting and
maintenance work. Do not perform any electrical work unless you are qualified
to perform such work.
2 Before performing any maintenance work inside a power source, disconnect
the power source from the incoming electrical power.
3 Maintain cables, earthing wire, connections, power cord and power supply in
safe working order. Do not operate any equipment in faulty condition.
4 Do not abuse any equipment or accessories. Keep equipment away from heat
sources such as furnaces, wet conditions such as water puddles, oil or grease,
corrosive atmospheres and inclement weather.
5 Keep all safety devices and cabinet covers in position and in good repair.
6 Use equipment only for its intended purpose. Do not modify it in any manner.