ESAB LTR 160, Руководство по обслуживанию

Страница: 43 / 46

-- 43 --
cltr0de4
Mode 2/4--stroke
2 stroke: arc is struck when the torch trigger is depressed and extinguished when the trigger
is released.
4 stroke: there is no need to keep the torch trigger depressed during the welding sequence.
Press and release the trigger to strike the arc. Press and release the trigger again to extinguish
the arc.
Mode = Lift--Arc
The torch electrode is positioned at the point where you want to start welding, when you
press the trigger and raise the torch the arc is struck.
Using the built--in slope--up function the current rises to the preset value. When you want to
stop welding you release the switch and the current slowly decreases in accordance with the
preset slope--down time.
bt07t001
Place the electrode against the workpiece . Press the torch switch
bt07t002
Tilt the torch a little, lift and an arc is produced To stop -- release the torch trigger