ESAB ES 95i, Руководство по эксплуатации

Страница: 15 / 40

ESAB ES 95i
Manual 0-5458 3-3 INSTALLATION
Input Power
Each unit incorporates an INRUSH circuit. When the MAIN CIRCUIT SWITCH is turned on, the inrush circuit provides pre-charging for the
input capacitors. A relay in the Power Control Assembly (PCA) will turn on after the input capacitors have charged to operating voltage
(after approximately 5 seconds)
NOTE!
Damage to the PCA could occur if 133 VAC or higher is applied to the Primary Power Cable.
Table 3-2: Primary Circuit Sizes to Achieve Maximum Current
Model
Primary Supply Lead Size
(Factory Fitted)
Minimum Primary
Current Circuit Size
(Vin/Amps)
Current & Duty Cycle
GTAW (Lift TIG) SMAW (Stick)
ESAB ES95i 12 AWG (3.3mm²)
115V/20A - 75A / 23V @ 40%
115V/21A 95A / 13.8V @ 20% -