ESAB CIGWELD Transmig 255i, Руководство по эксплуатации, Страница: 34 / 96

OPERATING MANUAL
Transmig 255i Transmig 255i
OPERATION 4-8 Manual 0-5550
22. Cooling Fan
The Transmig 255i is fitted with a fan as needed feature. Fan as needed automatically switches the cooling
fan off when it is not required. This has two main advantages; (1) to minimize power consumption, and
(2) to minimise the amount of contaminants such as dust that are drawn into the power source.
Note that the fan will only operate when required for cooling purposes and will automatically switch off
when not required.
23. Hot Start Feature (Not Shown)
This feature operates in Stick (Manual Arc) mode. The Hot Start feature improves the arc start characteristics
by momentarily increasing the welding current to a level above the preset amperage (Welding Current).
This is a preset feature and is not adjustable.
24. Anti Stick Feature (Not Shown)
This feature operates in Stick (Manual Arc) mode. The anti stick feature senses when the electrode sticks
and automatically reduces the current to prevent the Stick Electrode from sticking to the work piece. This
is a preset feature and is not adjustable.