ESAB Aristotig 255 LTN 255, Инструкция по эксплуатации

Страница: 19 / 32

-- 19 --
bt19d12e
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 15 . Read through before you start using the equipment!
8
4 5 3 2
1
9
6 10 11 12 7
1 . Mains power switch 9. Gas nipple (connection of gas cylinder)
2. Yellow indicating lamp 10. Connection for TIG torch
3. White indicating lamp 12 . Connection for return cable when TIG welding
4 . Display
5 . Setting knob The welding cable and return cable should be con-
t d t 11 d 12
6 . Push--buttons
nected to 11 and 12
7. Remote control connection
8 . Dust filter
When the main power switch is switched on the white indicating lamp, on the front,
comes on.
To take your mind off the risk of overloading the machine it has been equipped with
an integrated thermostat that trips if the temperature becomes too high.
When this occurs the welding current is cut out and the yellow indicating lamp comes
on. In addition, the error code ”E13” is displayed. When the temperature has
dropped the thermostat automatically resets.
GB