ESAB Aristo RoboFeed 3004w, Инструкция по эксплуатации

Страница: 5 / 20

-- 5 --
bm40d1ea
3 INTRODUCTION
The RoboFeed 3004w wire feed unit is intended for MIG/MAG welding along with
robotic equipment.
ESAB’s accessories for the product can be found on page 18 .
3.1 Equipment
The wire feed unit is supplied with an instruction manual and a sticker with
recommended wear parts.
4 TECHNICAL DATA
RoboFeed 3004w
Power supply 42 V 50--60 Hz
Power requirement 147 VA
Motor current I
max
3.5 A
Settings data
Wire feed speed 0.8--25.0 m/min
Gun connection EURO
Wire dimension
Fe
Ss
Al
Cored wire 0.6--1.6 mm
0.6--1.2 mm
1.0--1.6 mm
0.8--1.6 mm
Weight 7.3 kg
Dimensions (l x b x h) 362 x 246 x 235 mm
Shielding gas
max pressure
Gases for MIG/MAG welding
5 bar
Coolant
max pressure
50% water / 50% glycol
5 bar
Maximum permissible load at
60% duty cycle
100% duty cycle 500 A
280 A
Enclosure class IP2X
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
The duty cycle is valid for 40
˚ C.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Apparatus marked IP2X are intended for indoor use.
GB