ESAB Aristo Arc 4000i, Руководство по обслуживанию

Страница: 72 / 78

S0740 800 191/E080229/P78
-- 72 --
cu20i1
OPERATION
General safety regulations for the handling of the equipment can be found in the instruction
manual. Read through before you start using the equipment!
Connections and control devices, Mig U4000i
1 Connection for cooling water from the TIG
torch -- RED
10 White indicating lamp -- Power supply ON
2 Connection with ELP* for cooling water to
the TIG torch -- BLUE
11 Orange indicating lamp -- Overheating
3 Cooling water filler
4 Connection for welding current cable (+)
at MMA welding or for return cable at TIG
welding
12 Connection for control cable to the wire
feed unit or to the terminating resistor
5 Connection for remote control adapter 13 Connection for gas hose
6 Connection for return cable (--) or for wel-
ding current cable at TIG welding
14 Connection for welding current to the wire
feed unit
7 Connection for start signal from the torch. 15 Connection for cooling water to the wire
feed unit -- BLUE
8 Connection for gas to the TIG torch 16 Connection for cooling water from the wire
feed unit -- RED
9 Main power supply switch, 0 / 1 / START
* ELP = ESAB Logic Pump, see Cooling unit on page 75.