ESA Ex22DSR, Руководство пользователя

Страница: 13 / 13

II 3D Ex tc IIIC IP65 T100°C
ADDITIONAL INSTALLATION RULES (ATEX ZONA 22)
The ATEX certification decade in case of every type of modifications of the original device that are not done by the manifacturer
All the electrical wiring must be done according to the Europen rule EN 60079-14
In case of faulty that does not depend only to the fuse, switch off immediately the supply voltage and contact the supplier. The
reparation of the device must be done only in our laboratory and the device must be sent with the enclosure to our factory.
In case of application of cable glands by the final user, The company does not assume any responsibility. Use only cable glands
IP65 ATEX certified with same or superior certification of the device and type ISO R/68.
The fixing holes must be done with the right diameter indicated for that cable gland.
With the purpose to avoid the entry of dust inside the equipment through the pneumatic connections for the reading of the dP,
insert on such lines an opportune systems for dusts blocking.
ATEX MARKING DETAILS
EUROPEAN UNION Conformity brand
Useful in ATEX classified zone with potentially explosive atmosphere.
II Group II. Surface plant
3D Category - Dust
Ex tc Level of protection by enclosure
IIIC Explosive conductive powders
IP65 Protection degree
T100°C Maximum surface temperature
-10<Ta<+50°C Ambient temperature