ESA EW410 7 Series, Руководство пользователя

Страница: 33 / 37

Chapter 3
BIOS SETTINGS
User's Manual 33
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
X Advanced
► Console Redirection Settings
Configure the serial settings of the current COM port.
Terminal Type
Select terminal type: VT100, VT100+, VT-UTF8 or ANSI.
Bits per second
Select serial port transmission speed: 9600, 19200, 38400, 57600 or 115200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: None, Even, Odd, Mark or Space.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control type: None or Hardware RTS/CTS.
X Advanced
SIO NUVOTON6116D
SIO NUVOTON6116D
► Serial Port 1 Configuration NCT6116D
► Serial Port 2 Configuration
► Serial Port 3 Configuration
► Serial Port 4 Configuration
WatchDog Timer Unit [Second]
SuperIO WatchDog Timer 0
Case Open [Disabled]
► NCT6116D HW Monitor
WatchDog Timer Unit Se-
lection
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
WatchDog Timer Unit
Select WatchDog Timer Unit — Second or Minute.
SuperIO WatchDog Timer
Set SuperIO WatchDog Timer Timeout value. The range is from 0 (disabled) to 255.
Case Open
Enable or disable the case open detection function.
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Note:
The sub-menus are detailed in following sections.
COM1
Console Redirection Settings
Enable CPU SmartFan
Terminal Type
Bits per second
Data Bits
Parity
Stop Bits
Flow Control
[VT100+]
[115200]
[8]
[None]
[1]
[None]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F7: Popup Boot Device List
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit