Chapter 2
HARDWARE INSTALLATION
User's Manual
17
X
System Memory
X
Jumper Settings
Please follow the steps below to install the memory card into the socket.
Step 1:
Insert the memory card into the slot
while making sure 1) the notch
and the key are aligned, and 2)
the non-connector end rises
approximately
45
degrees
horizontally. Press the card firmly
into the socket while applying and
maintaining even pressure on both
ends.
Power On Select (JP7)
Step 2
Step 2:
Press the end of the card far from
the socket down while making
sure the retention notch and the clip
align as indicated by the dot- ted line
in the illustration. If the retention
notch and the clip do not align,
please remove the card and re-
insert it. Press the card all the way
down.
Step 3:
The clips snap automatically and
abruptly to the retention notches of
the card sounding a distinctive
1-2 On: Power On via
Power Button (default)
JP7
2-3 On: Auto
Power On via
DC In
Step 3
click, and lock the card in place.
Inspect that the clip sits in the notch.
If not, please pull the clips outward,
release and remove the card, and
mount it again.
The jumper allows you to choose between system power-on via power button and automatic
power-on via DC power in.
10
1
11
2
12
3
10
1
2 6
2 1
1 5
1
2
3
1
2
3