Page 6 of 8
Installation
Before installation
1.
Define where the Transmitter and the Receiver unit will be located.
2.
Use CATx ethernet cable (EIA/TIA 568B industry standard compliant) for the interconnection
between Transmitter and Receiver Unit.
3.
Never disassemble or reassemble the enclosures for any purpose. This may cause personal
injury and/or property damage.
Transmitter Unit
1.
Connect a video source to the video input port of the Local unit (Transmitter) using a male to
male video cable.
2.
Connect a CATx cable from Transmitter (T1) to Receiver Unit (R1)
3.
Connect a CATx cable from Transmitter (T1’) to Receiver Unit (R1’)
4.
Use a mini-USB to USB-A cable to connect PC to Transmitter Unit
Receiver Unit
1.
Connect a monitor to the video output port of the Receiver unit using a male to male video
cable.
2.
Power on the unit
Note
The quality of the output signal will depend largely upon the quality of the video source, cable and
display device used.
Low quality cables degrade the output signal causing elevated noise levels.
Use the proper cable. (CAT5 Industrial grade cables).
