7
PUSH-BUTTON FUNCTIONS
MODE BUTTON
Selects AC or DC measurement when in Volts, Amps, mA or uA
functions. Also used to select between
Ω
,
or
•
))) when in
the Ohm, Diode and Continuity function.
HOLD
Press the HOLD button and the reading will freeze on the display.
Press the button again and the frozen reading displayed will return
to normal measurement status.
RANGE button
When the meter is first turned on, it automatically goes into Auto-
Ranging mode. This automatically selects the best range for the
measurements being made and is generally the best mode for most
measurements. For situations requiring the test range to be
manually selected, perform the following:
Press the RANGE button. The “Auto Range” display indicator will
turn off, The “Manual Range” display indicator will turn on.
Press the RANGE button to step through the available testing
ranges until you select the test range desired.
Press and hold the RANGE button for 2 seconds to exit the Manual
Ranging mode and return to Auto-Ranging.
MAX/MIN BUTTON
The MAX/MIN function allows the meter to capture the highest or
lowest measurement for later reference.
Press the MAX/MIN button to begin measurement. The indicator
MAX or MIN will appear in the display. While in MAX mode, the
meter high reading will be captured and held on the display. While
in MIN mode, the low reading will be captured and held on the
display.
