13
ROUTINE
MAINTENANCE
4. Position the attachment flat on the ground with the
tooth mount in the raised position as shown.
5. Install the tooth mount support plates and secure
with bolts.
6. Install the cylinder on the frame and tooth mount
cylinder pivot, and tighten cylinder mount bolts.
Expanded Metal Grate Removal and Installation
1. Position the attachment flat on the ground,
engage the park brake, and shut off the loader
engine.
2. To remove the expanded metal grates, remove
the two bolts at the rear of each grate.
3. Lift up on the rear of the grate and remove it from
the frame.
Expanded metal grates may
have sharp edges. Wear gloves to prevent
cuts when removing and installing expanded
metal grates.
4. To install expanded metal grates, use reverse
order of above instructions.