Erskine Attachments 1085RM Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 32

background image

31

LIMITED WARRANTY

Erskine Attachments LLC warrants each new machine manufactured by us to be free from defects
in material and workmanship for a period of twenty-four (24) months from date of delivery to the
original purchaser.

Our obligation under this warranty is to replace free of charge, at our factory or authorized
dealership, any part proven defective within the stated warranty time limit.

All parts must be returned freight prepaid and adequately packaged to prevent damage in transit.

This warranty does not cover:

1.

New products which have been operated in excess of rated capacities or negligence

2.

Misuse, abuse, accidents or damage due to improperly routed hoses

3.

Machines which have been altered, modified or repaired in any manner not authorized
by our company

4.

Previously owned equipment

5.

Any ground engaging tools in which natural wear is involved, i.e. tooth tips, cutting
teeth, etc.

6.

Normal maintenance

7.

Fork tines

8.

Hydraulic motors that have been disassembled in any manor

In  no  event  will  the  Sales  Representative,  Dealership,  Erskine  Attachments  LLC,  or  any  other
company affiliated with it or them be liable for incidental or consequential damages or injuries,
including but not limited to the loss of profit, rental or substitute equipment or other commercial
loss.  Purchaser’s sole and exclusive remedy being as provided here in above.

Erskine Attachments LLC must receive immediate notification of defect and no allowance will be
made for repairs without our consent or approval.

This warranty is in lieu of all other warranties, express or implied by law or otherwise, and there
is no warranty of merchantability or fitness purpose.

No  agent,  employee,  or  representative  of  Erskine  Attachments  LLC  has  any  authority  to  bind
Erskine Attachments LLC to any warranty except as specifically set forth herein.  Any of these
limitations excluded by local law shall be deemed deleted from this warranty; all other terms apply.

This  warranty  may  not  be  enlarged  or  modified  in  any  manner  except  in  writing  signed  by  an
executive officer of Erskine Attachments LLC to improve its products whenever it is possible and
practical  to  do  so.    Erskine  Attachments  LLC  reserves  the  right  to  make  changes  and  or  add
improvements at  any time without  incurring any obligation to make such changes or  add such
improvements to products previously sold.

Erskine Attachments LLC

P.O. Box 1083 Alexandria, MN 56308

Phone (218) 435-4045 Fax (218) 435-5293

«
...
29
30
31
32
»

Содержание 1085RM

































Отзывы:

Нет отзывов

Похожие инструкции для 1085RM

Бренд: York Страницы: 24

Sweepmaster P900 R

Бренд: HAKO Страницы: 64

Бренд: MSW Страницы: 11

Бренд: Frigidaire Страницы: 10

Бренд: Troy-Bilt Страницы: 28

Бренд: Troy-Bilt Страницы: 56

Бренд: Kobalt Страницы: 28

Бренд: Westfalia Страницы: 23

Бренд: Toro Страницы: 28

Бренд: Wipeket Страницы: 32

Бренд: Farm King Страницы: 76

Бренд: Power smart Страницы: 96

Бренд: Troy-Bilt Страницы: 1

Бренд: Texas Equipment Страницы: 48

GRIZZLY GP-1 ETL

Бренд: B-Air Страницы: 8

Бренд: Yard force Страницы: 32

Бренд: Yard Works Страницы: 48

Бренд: Yard-Man Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды