9
PUMA-I
Quick installation and programming guide
English
WARNING
This quick guide is a summary of the complete installation manual. The manual contains safety warnings and
other explanations which must be taken into account. The installation manual can be downloaded by going
to the "Downloads" section of Erreka website:
http://www.erreka-automation.com
D268A
2
D268B
2
3
E268C
Assembly levels (mm)
Unlocking
Locking for operation
motorised:
•
Turn the handle (2) anti-clockwise 270°
without forcing it.
•
Turn the key (1) anti-clockwise and remove.
•
Push the cylinder (3) inward and manually
move the gate to interlock it in the operator
mechanism
E268D
Electrical wiring
A:
Main power supply
B/E:
Flashing light/Antenna
C:
Photocells (Tx / Rx)
D:
Pushbutton/wall key
Elements of the complete installation
Unlocking
Locking
Unlocking for manual
operation:
•
Insert the key (1) and
turn clockwise without
forcing it.
•
Turn the handle (2)
clockwise 270°,
through to the stopper
but without forcing it.
WARNING
: The PUMA-I
operator is supplied
without a capacitor for the
motor, since the control
b o a r d ' s I n v e r t e r
technology makes it
unnecessary. If this board
is used to replace another
operator,
do not use a
capacitor for the motor
.
1
