background image

9

PUMA-I

Quick installation and programming guide

English

  

  

WARNING

This quick guide is a summary of the complete installation manual. The manual contains safety warnings and
other explanations which must be taken into account. The installation manual can be downloaded by going
to the "Downloads" section of Erreka website: 

http://www.erreka-automation.com

D268A

2

D268B

2

3

E268C

Assembly levels (mm)

Unlocking

Locking for operation 

motorised:

Turn the handle (2) anti-clockwise 270°
without forcing it. 

Turn the key (1) anti-clockwise and remove.

Push the cylinder (3) inward and manually
move the gate to interlock it in the operator
mechanism

E268D

Electrical wiring

A:

Main power supply

B/E:

Flashing light/Antenna

C:

Photocells (Tx / Rx)

D:

Pushbutton/wall key

Elements of the complete installation

Unlocking

Locking

Unlocking for manual 

operation:

Insert the key (1) and
turn clockwise without
forcing it.

Turn the handle (2)
clockwise 270°,
through to the stopper
but without forcing it.

WARNING

: The PUMA-I

operator is supplied
without a capacitor for the
motor, since the control
b o a r d ' s   I n v e r t e r
technology makes it
unnecessary. If this board
is used to replace another
operator, 

do not use a

capacitor for the motor

.

1

Отзывы: