Instalacion_0
3 v1.3.fm
- 17
/11/10
INSTALLATION
44
Installation manual
Connect the motor to the control panel (AEP20PIL)
C1, C2:
capacitors
E1: encoder A1
1
Red:
(+)
2
Copper shield: (-)
3
Blue:
signal
E2: encoder A2
4
Red:
(+)
5
Copper shield: (-)
6
Blue:
signal
G2: motor A2
7
Brown: turn
1
8
Black: turn
2
9
Grey: common
F2: brake A2
10 Orange
11 Violet
T
Yellow-green: earth
G1: motor A1
12 Brown: turn
1
13 Black: turn
2
14 Grey: common
F1: brake A1
15 Orange
16 Violet
T
Yellow-green: earth
Before making any electrical connections,
check the control panel instructions
manual.
Before carrying out any gate movement,
ensure there is no person or object in the
radius of action of the gate and the
operation mechanisms.
1
Connect the motor (M1, M2) and the capacitor
(C1, C2) to the control panel.
Connect the motor's earth cable to the
earth terminal (T) on the control panel.
2
Connect the control panel to the power supply.
3
Activate the power supply switch.
4
Using the control panel mini push buttons
(PUL1, PUL2, PUL3, PUL4), check the motor
connections are correct (rotation direction).
If the rotation direction is not correct,
interchange the wires 12 and 13 of M1 or 7 and
8 of M2, as appropriate.
Ensure the earth cable of the motors is
connected to the control panel earth
terminal.
Instalacion_03 v1.3.fm Page 44 Wednesday, November 17, 2010 4:57 PM
Содержание CICLON
Страница 2: ...CICLON book Page 2 Friday April 11 2008 2 34 PM...
Страница 86: ...CICLON book Page 65 Friday April 11 2008 2 34 PM...
Страница 87: ...CICLON book Page 1 Friday April 11 2008 2 34 PM...