Errebi COMPACT KS10, Руководство по эксплуатации и обслуживанию

Страница: 19 / 25

4. MAINTENANCE ( FIG. 1.1 )
WARNING : It is forbidden to carry out any operation when the machine is moving . Stop the
machine, disconnect it from the electrical power supply and wait that the wheels stand still before
carrying out any operation .
4.1 Routine maintenance
WHEELS
WARNING : The wheels should be handled carefully at all times .
Each use inspect wheel quality. If damage has occurred on the wheel profile the wheels should be changed .
SAFETY DEVICES
Each use check the efficiency of the protections and the safety systems .
EXTERNAL CLEANING OF THE MACHINE
Daily clean the machine working surface and the upper protection using a dry rag or a vaccum cleaner to
avoid metal powder deposits .
INTERNAL CLEANING OF THE MACHINE ( Fig. 1.1 )
Carry out the following operations montly or every 50 hours of use :
FRONT STRUCTURE
1. remove the screws of the front structure (14) ;
2. check that in the wheel compartment there is no metal powder. If necessary, clean it by a dry rag or
the vaccum cleaner ;
3. check that the vacuum cleaner connection is not clogged. If necessary clear and clean it using a dry
rag or the vacuum cleaner ;
4.
empty the dust control and check its functioning ;
5.
assemble the front structure (14 ) .
STEEL BASEMENT
1. remove the screws of the steel basement (15) ;
2. check that in the compartment there is no metal powder. If necessary, clean it by a dry rag or the
vaccum cleaner ;
3. check status of belt and pulley ;
4. assemble the steel basement (15) .
4.2 Special maintenance
The special maintenance includes all repairs caused by failures or wear of components except the wheels.
WARNING : Before carrying out any special maintenance operation, contact the
manufacturer.
ERREBI S.p.A.
Sharpener model COMPACT KS10
Use and maintenance manual Version 01-2013
19