Fabricant de Contrôle d’Accès depuis 1985 Manufacturing Access Control since 1985
The installer’s choice
Receiver type:
Supereheterodyne.
Demodulation: AM/ASK.
Operating frequency:
433.92 Mhz.
Sensitivity ( for good signal ):
-115 dBm.
Input load:
50 Ohm.
Power supply :
12 o 24 V ac/dc.
Current consumption ( @12Vdc)
from 25 mA to 90 mA (max)
N° of relays:
4 (3 NO and 1 NO/NC).
Max power on relay output:
24VA max 60V .
Memory capacity:
500 transmitters
Security protocol
Keeloq® Hopping code
N° of code combinations
2exp64
Operating temperature:
from -20 to + 70 °C.
Dimensions ( Fig. 2):
120 x 80 x 40 mm
Weight:
65 gr.
Relay operating mode
Pulse, step, timed
Delay
from 1 sec. to 24h: 59 min.
Enclosure protection
IP55
The receiver Erone type SEL2641R433-XPL54 ( Fig. 1) is a AM/ASK single conversion
superheterodyne receiver with integrated “Keeloq® Hopping code” decryption.
A special algorithm allows to keep synchronyzed transmitter and receiver. The receiver,
having dry contacts relays output, can be connected to any type of device ( gate, garage
door, rolling shutters, awnings, anti-burglar appliances, lighting, etc.).
The transmitter memorization can be carried out either with 2 push-buttons of the
receiver or remotely, using only the keys of the transmitter. The setup of the remaining
parameters of the receiver can be done only with the 2 push buttons of the receiver.
All the setting steps are displayed by a backlit LCD display.
The internal data can be saved/restored to/from an external memory.
4 RELAYS RECEIVER SEL2641R433-XPL54
2
Technical Specifications
3
Mounting
www.erone.com - www.cdvigroup.com
Fig.1
1
Introduction
Option A ) make a hole ( ø11 mm )
on the bottom of the box and pass
the cables throught
Option B ) Use of PG7 cable glands
(not provided )
Drill the placing surface
with ø6 tool and insert the
2 plugs
Then fix the support with
the screws provided
F1001000082
Fig. 3
Fig. 2
Fig. 1
ERONE
XPL54
ERONE
XPL54
ERONE
XPL54
123
81,5
41,5
